Non DG Destroyer – Concrete Cleaner

Description

Non DG Destroyer – Concrete Cleaner

Non DG Destroyer is a professional, acid-free concrete cleaner formulated to dissolve efflorescence, cement film and mineral deposits quickly—without the hazards of traditional acids. Rated Non-Dangerous Goods for safer transport and handling, it’s non-fuming, biodegradable and engineered for superior results on concrete, brick, stone, pavers and tiles.

Why professionals choose Non-DG Destroyer

• Non-DG classification for easier shipping, storage and compliance
• Fast-acting on efflorescence, calcium and cement film
• Non-fuming, biodegradable, low-odour formula
• Safe on most masonry substrates when used as directed
• Acid-free alternative to hydrochloric/phosphoric cleaners

Recommended uses

• Efflorescence and mineral deposit removal
• Mortar haze/cement residue clean-up
• Concrete, brick and paver restoration
• Surface prep before sealing or coating

Dilution Ratios

Application	Mix Ratio (Product : Water)	Directions
Light Cleaning / Surface Prep	1 : 10	Apply, allow to dwell 3–5 mins, then rinse.
Efflorescence & Mineral Removal	1 : 5	Apply evenly, dwell 5 mins, agitate if required, rinse.
Cement Film / Mortar Residue	1 : 3	Allow to dwell up to 10 mins, agitate, then pressure rinse.
Heavy Build-Up / Restoration	1 : 1	Use with caution on sensitive surfaces. Rinse thoroughly.

Always pre-test in an inconspicuous area. Do not allow product to dry on the surface.

Coverage

• Light cleaning: ~8–10 m²/L (diluted)
• Efflorescence removal: ~6–8 m²/L
• Heavy cement film/restoration: ~4–6 m²/L

Coverage varies with substrate porosity, contamination, dilution and application method.

Directions

1. Wet surrounding vegetation and mask sensitive metals/glass.
2. Dilute per the table. Apply by brush, pump sprayer or low-pressure applicator.
3. Allow dwell time (3–10 mins). Agitate if required.
4. Rinse thoroughly with clean water. Repeat on heavy deposits.

Safety & handling

Although Non-DG, wear gloves and eye protection. Avoid prolonged contact with polished metals and glass. Store sealed in a cool, dry place.

Sizes

5Lt, 20Lt & bulk sizes available.

Related products

• Evolving Elements House Wash Mix
• Evolving Elements Heavy-Duty Degreaser
• Evolving Elements Roof Restore Pro

FAQs

Is Non-DG Destroyer safe on coloured/treated concrete?
Yes—when diluted correctly and rinsed thoroughly. Always spot test first.

Can I use it with a pressure washer?
Yes. Apply, allow to dwell, agitate if needed, then rinse with low–medium pressure.

Will it remove rust marks?
It helps with light rust staining on mineral surfaces. For heavy rust, use a dedicated rust remover first, then follow with Non-DG Destroyer.

What surfaces should I avoid?
Avoid polished metals, glass and acid-sensitive natural stones unless thoroughly tested and protected.

For more information on chemical safety standards in Australia, visit
Safe Work Australia.

How Non-DG Destroyer Works

Non-DG Destroyer uses advanced chelation, sequestration and surface-detaching technologies to break the bond between mineral deposits and masonry substrates—without relying on corrosive acids. This allows it to dissolve efflorescence, calcium and cement residues efficiently while remaining safe for operators, equipment and surrounding surfaces. Unlike traditional acid cleaners that etch concrete and release harmful fumes, Non-DG Destroyer maintains substrate integrity and provides a far more controlled cleaning reaction.

The formula is engineered to penetrate porous materials such as concrete, pavers, sandstone and brick, loosening crystalline deposits from within the substrate. This deep-cleaning action makes it highly effective for restoration contractors, pressure washers, concrete finishing professionals and coating applicators who require a reliable non-acid alternative that still delivers powerful results.

Best Practices for Professional Results

• For heavy efflorescence, apply two wet-on-wet passes before rinsing.
• On porous substrates, pre-wet lightly to prevent excessive absorption while maintaining reaction strength.
• Use stiff nylon brushes to improve removal of thick mineral build-up.
• For pre-seal cleaning, ensure the surface is fully neutralised and dry before applying coatings.

Using Non-DG Destroyer as part of a structured cleaning and preparation process ensures surfaces are optimally cleaned without damage, helping maximise coating adhesion, long-term durability and overall finish quality.