Drone Window Cleaner

Description

Drone Clean Bioglass Concentrate

This high-performance, biodegradable glass window cleaner is specifically engineered for drone-based cleaning systems, offering exceptional results with maximum efficiency. Designed to tackle tough environmental contaminants, it effectively removes mineral deposits, oily films, and atmospheric grime in a single pass—minimizing time and resource usage during operations.

Formulated with a balanced pH of 9.0, this cleaner delivers optimal cleaning power while remaining safe for use on a wide range of exterior surfaces. It is compatible with glass, solar panels, and most modern building facades, ensuring thorough yet gentle cleaning when used according to guidelines. Its low to medium foam profile enhances drone performance by reducing residue buildup and promoting even application, allowing for consistent coverage and easy rinsing.

Ideal for commercial and industrial use, this formulation meets the demands of sustainable maintenance practices without compromising on effectiveness. Whether maintaining high-rise windows or expansive solar installations, this cleaner supports both operational efficiency and environmental responsibility.

Directions for use:

Dilute the product according to the guidelines in the table below. Apply evenly using an appropriate drone spraying system, ensuring uniform coverage across the surface. Allow the solution to dwell for 1–2 minutes without drying. Rinse thoroughly with clean water to achieve a streak-free finish.

Recommended Dilution Ratios:

For best results, avoid applying under direct sunlight or on hot surfaces. Do not allow the solution to dry on the surface prior to rinsing.

Please note:  All listed ratios are a suggested starting point. Your application may require adjustment

Safety and Handling:

• Avoid inhalation of the vapor, prolonged skin contact, and particularly eye contact.
• Wear protective clothing to minimize skin contact and wear goggles where splatter is likely.
• Where spills occur, soak up liquid spillage with sand/sawdust and dispose of it sensibly.
• Do not permit runoff to sewer, stormwater, or open bodies of water.
• Wear protective footwear and seek assistance if necessary.
• Storage- no specific issues, store away from food and drink.

First Aid Measures:

Ingestion- If swallowed, wash out mouth with water. DO NOT induce vomiting. Drink at least two (2) glasses of water. Seek medical attention.
Eye – Wash with copious amounts of water for 15 minutes holding eyelid(s) open. Take care not to rinse contaminated water into the non-affected eye. Seek medical attention.
Advice to Doctor -Treat symptomatically.

Important Notes:

Do not apply and allow the product to dry on the surface.
Avoid application in full sun, on hot surfaces or in hot windy conditions. Ensure weather conditions are suitable; do not apply if the surface temperature is below 10°C and raining. Do not apply if the temperature exceeds 30°C.