Graffiti Remover

Description

Revitalize your surfaces with the outstanding power of Evolving Elements Graffiti Remover, the ultimate solution for effortless graffiti removal. Designed for both residential and commercial use, this innovative formula penetrates deep into bare brick, stone & masonry surfaces, effectively breaking down spray paint, marker, and other stubborn graffiti.

Evolving Elements Graffiti Remover is environmentally friendly and biodegradable, ensuring a safe and non-toxic cleaning experience. Its advanced formula is tough on graffiti but gentle on surfaces, making it perfect for use on brick, concrete and more. Simply apply, let it sit for a few minutes, and watch as the graffiti dissolves, leaving your surfaces clean and restored.

This graffiti remover is easy to use, whether you’re tackling large graffiti murals or small tags, Evolving Elements Graffiti Remover delivers consistent, reliable results every time. Protect the integrity and appearance of your property with this powerful, eco-friendly solution that helps maintain a clean and welcoming environment.

Experience the transformation with Evolving Elements Graffiti Remover – where advanced cleaning technology meets environmental responsibility. Say goodbye to graffiti and hello to pristine surfaces with Evolving Elements.

Instructions for Use

1. Apply Evolving Elements Graffiti Remover to the surface using a nylon brush, broom, or pump-up sprayer.
2. Apply the product three times at three-minute intervals, generously flooding the graffiti or stain each time.
3. After the final application, wait approximately three minutes.
4. Agitating the surface while applying the product can enhance effectiveness.
5. With continued use, you will learn how many applications are necessary for different surfaces and spray paints.
6. 1 litre will remove approximately 5 sq mtrs of typical graffiti on concrete, brick, block or masonry surfaces.
7. For older or thicker graffiti, patience is essential. Keep the graffiti wet with the product for as long as possible before rinsing.
8. Rinsing

• Use a hot or cold pressure washer at low pressure, with hot water being the most effective.
• Ideally, use 1500 – 2000 psi with a 15º or 25º fan jet at about 6 inches from the surface.
• Alternative Method: If a pressure washer is unavailable, use a stiff nylon brush and a bucket of water to rinse.